IOC8T 200-580-000-111 input/output card VIBRO-METER

Vibro-Meter's IOC8T 200-580-000-111 input/output card is an interface card for the AMC8 analog monitoring card in the VM600 rack-mount machinery monitoring system. Here is a detailed description:

Channel Configuration: Supports 8 temperature or process monitoring channels, all channels are independently configurable, and can accept thermocouple (TC), resistance temperature detector (RTD), current and voltage inputs.

Signal Input and Output: Each monitoring channel has a configurable signal input with current source output, and the DC output can be configured as a current-based signal (4 to 20mA) or a voltage-based signal (0 to 10V).

Relay Functionality: Contains 4 configurable relays, each with three contacts, which can be used for alarm signals under software control. There are also alarm reset (AR) and dangerous bypass (DB) control inputs.

Mounting Method: Mounts at the rear of the VM600 ABE04x rack, directly behind the AMC8 card, forming a card pair.

Cold Junction Compensation: Cold Junction Compensation (CJC) sensor processing is available on two optional channels for thermocouple temperature channels.

Other Features: Supports real-time card insertion and removal (hot swap) to facilitate card replacement or maintenance while the system is running. Configuration is performed through the RS-232 port on the front panel of the relevant AMC8 card, and can also be accessed through the VME bus for the CPUx card in slot 0 of the VM600 rack (ABE04x only).