MVI46-MCM | ProSoft | Communication Module

The following is the data sheet content of the ProSoft MVI46 - MCM communication module:

General Information

Product Model: MVI46 - MCM.

Product Type: Modbus Master/Slave Communication Module.

Brand: ProSoft.

Applicable System: Rockwell Automation SLC 500 Series Processor System.

Features

Protocol Support: Supports multiple Modbus protocols, including Modbus TCP/IP, RTU, ASCII and DF1, and can be connected to various Modbus protocol compatible devices.

Data Transfer: Data is transferred between the MVI46 module and the SLC processor. The module is identified as an input/output module, can access the processor memory, and realizes data transfer between the module and the processor through ladder logic.

Configuration and Monitoring: It can be configured and monitored in RSLogix 500 programming software, obtains configuration data through user-defined ladder diagrams, and has LED diagnostic functions to facilitate viewing of module status.

Hardware Specifications

Slot Type: Single slot, compatible with 1746 backplane, can be installed in local or expansion I/O rack, does not support remote rack.

Interface: Equipped with 2 Ethernet ports and 1 serial port, the serial port is RJ45 (DB-9M with supplied cable) RS-232/422/485 interface, 1 RJ45 RS-232 port is used for configuration, and the other 2 are used for Modbus communication.

Electrical Characteristics

Power Requirements: Power is provided by the SLC rack in which it is installed, requiring 800mA of available power.

Environmental Specifications

Operating Temperature: -40°C to +85°C.

Humidity Range: 5% to 95%, non-condensing.