• Schneider Electric METSEION7400 PowerLogic ION7400
  • Schneider Electric METSEION7400 PowerLogic ION7400

Schneider Electric METSEION7400 PowerLogic ION7400

plcru@foxmail.com

+86 18185397189

Schneider Electric METSEION7400 PowerLogic ION7400Product overviewMETSEION7400 i

Schneider Electric METSEION7400 PowerLogic ION7400

Schneider Electric METSEION7400 PowerLogic ION7400

Product overview METSEION7400 is the standard version of PowerLogic ION7400 high-precision power and power quality meter with integrated display, 512 MB onboard memory, 256 samples per cycle sampling rate. It supports revenue metering, feeder monitoring, power quality analysis, disturbance recording and alarming for low and medium voltage electrical systems. Widely used in substations, data centers, industrial plants, commercial buildings and utility metering points. Compatible with EcoStruxure Power Monitoring Expert software for system-level reporting and analysis.

Measurement functions Three-phase true RMS voltage, current, frequency, total and per-phase active power, reactive power, apparent power, power factor. Active, reactive and apparent energy, demand values, voltage and current unbalance, phase rotation, total harmonic distortion up to 63rd harmonic. Voltage sag, swell and rapid voltage change detection, waveform capture, disturbance direction identification, event timestamping. Supports configurable math and logic calculations.

Accuracy ratings Active energy IEC 62053-22 Class 0.2S, ANSI C12.20 Class 0.2. Reactive energy IEC 62053-24 Class 0.5S. Voltage, current, active power, frequency IEC 61557-12 Class 0.2. Power quality measurement complies with IEC 61000-4-30 Class S, EN 50160, IEEE 519 and IEC 62586.

Signal and supply Nominal voltage input range 90–690 V AC line-line. Rated current input 1 A, 5 A or 10 A. Auxiliary supply 90–415 V AC or 110–415 V DC, 45–65 Hz.

Communication 10/100 Mbps Ethernet port supporting Modbus TCP, DNP3, IEC 61850, DLMS, RSTP. Serial port for Modbus RTU and ION protocol. Optical communication port for local configuration.

I/O and recording Configurable digital inputs, pulse outputs, relay outputs via expansion I/O modules. 800 configurable recorder channels, high-speed burst recording down to half-cycle interval. User-triggered or automatic waveform capture on power quality events. Onboard event log with time synchronization via SNTP.

Mechanical and enclosure Panel mount form factor with integrated TFT QVGA colour display, dimensions 98 x 112 x 78.5 mm. Weight 0.71 kg without optional modules. Front face IP54 / UL Type 12, rear side IP30. Optional DIN rail mount base and remote display units available separately.

Environmental Operating temperature -25 °C to +70 °C. Storage temperature -40 °C to +85 °C. Relative humidity 5% to 95% non-condensing. Maximum operating altitude 3000 m, installation category III.

Certifications and compliance CE, UL, CSA, RoHS. Designed for revenue grade billing and industrial power system monitoring.

Key features ION programmable engine for custom logic, control and alarming. Integrated local display for direct parameter viewing without software. Expandable I/O modules for pulse, relay and status signals. Time sync for multi-meter sequence-of-event recording. Daisy-chain Ethernet supported.

SCHNEIDER  ION7400.jpg

SCHNEIDER  ION7400..jpg