• HONEYWELL 2108B2051N Searchpoint Optima Plus infrared gas detector
  • HONEYWELL 2108B2051N Searchpoint Optima Plus infrared gas detector

HONEYWELL 2108B2051N Searchpoint Optima Plus infrared gas detector

plcru@foxmail.com

+86 18185397189

HONEYWELL 2108B2051N Searchpoint Optima Plus Infrared Gas DetectorProduct overvi

HONEYWELL 2108B2051N Searchpoint Optima Plus infrared gas detector

HONEYWELL 2108B2051N Searchpoint Optima Plus Infrared Gas Detector

Product overview Searchpoint Optima Plus is a point infrared flammable hydrocarbon gas detector for hazardous explosive atmospheres. It adopts non-dispersive infrared measurement principle, no moving parts, immune to catalytic poisons, failsafe design, fast response and low maintenance demand. Typical applications include offshore platforms, FPSO, refineries, LPG/LNG plants, compressor stations, solvent coating facilities and oil & gas terminals. Part number 2108B2051N is methane 0-100%LEL version, 4-20mA output, ATEX/IECEx certified, 316 stainless steel housing.

Measuring range 0–100% LEL, calibrated for methane for this part number. Other hydrocarbon or solvent calibrations available on other model codes.

Performance Accuracy for hydrocarbon: baseline < ±1% FSD, 50% FSD < ±2% FSD Accuracy for ethylene: baseline < ±2% FSD, 50% FSD < ±3% FSD Repeatability: < ±2% FSD at 50% FSD Linearity: < 5% FSD Response time: T50 < 3 seconds, T90 < 4 seconds (methane) Long term temperature drift: baseline ≤ ±2% FSD over full temperature range Pressure effect: 0.1% of reading per mbar

Signal output 4–20mA autosensing sink or source Inhibit level: 1–3mA, default 2mA Warning level: 0–6mA, default 3mA Fault: 0mA; HART capable variants adjustable to 1mA Over range: 20–21.5mA, default 21mA Optional HART version 7 superimposed on 4–20mA Optional multidrop Modbus RS485 via DX100(M) interface unit

Electrical Supply voltage: 18–32VDC, nominal 24VDC Max power consumption: < 4.5W

Mechanical and enclosure Enclosure material: 316 stainless steel Ingress protection: IP66 / IP67 Weight: 1.6kg Mounting thread: 3/4 NPT or M25 Dynamic optical heating control to prevent condensation on optics Integrated optics contamination warning Built-in event logging and comprehensive self-diagnostics

Environmental operating range Operating temperature: -40°C to +65°C

Certifications ATEX, IECEx, UL, CSA hazardous area approvals for explosive gas zones

Key features Failsafe infrared measurement Immune to catalytic bead poisons and inhibitors Works in inert background atmospheres No undetected sensor failures False alarm rejection algorithm Low routine calibration and maintenance Remote gas test port available Compatible with SHC1 handheld interrogator for calibration and diagnostic access

2108B2051N.jpg

2108B2051N..jpg