FLOBOSS S600 EMERSON Flow Computer

176449 - 04 is a model of Bently Nevada's 3500/45 position monitor, which is part of the 3500 series mechanical condition monitoring system. It is mainly used to monitor the position signal of mechanical equipment. The following is a detailed introduction:

Basic parameters:

Number of channels: four channels.

Input impedance: 1MΩ for DC linear variable differential transformer (DC LVDT), 10kΩ for proximity sensor or rotary position sensor (RPT), 137kΩ for AC linear variable differential transformer (AC LVDT), and 200kΩ for rotary potentiometer.

Power consumption: 7.7W for position input/output (I/O), 8.5W for AC LVDT I/O, and 5.6W for rotary potentiometer I/O.

Dimensions: about 16cm×16cm×12cm.

Weight: about 0.8kg.

Operating temperature: -30°C to + 65°C.

Features: Receives data from proximity sensors, rotary position sensors (RPTs), DC LVDTs, AC LVDTs, and rotary potentiometers, pre-processes the input signals, and compares them to user-programmable alarm set points. When the monitored parameters exceed the set alarm points, an alarm can be triggered to protect the machine while providing relevant information to operation and maintenance personnel.

Mounting: Single-slot mounting for installation in 3500 series racks.

Indicator lights: The front panel has OK, TX/RX, and bypass LED indicators to display information such as the device's operating status, communication status, and bypass mode.