Emerson Ovation 5X00899G01 Power Supply

Features

• Redundant Design: It usually adopts a redundant power configuration, which includes separate primary and secondary power supplies. Each power supply has independent external wide - range AC or DC input feeds, ensuring continuous power supply to the system even in the event of a failure in one power supply.
• Dual - Input Capability: It has dual - wide - range input capabilities, supporting both AC and DC inputs. This allows it to adapt to different power supply environments and increases the reliability and flexibility of power supply. The AC input can typically handle voltages in the range of 85 - 264 VAC at 43 - 67 Hz, and the DC input can handle voltages in the range of 90 - 375 VDC.
• High - Efficiency Power Conversion: It uses high - efficiency power supply modules to improve power conversion efficiency, reduce heat generation, and enhance the service life of equipment. The power supply efficiency is generally above 90%, which helps to save energy and reduce operating costs.
• Modular Fan - less Design: The power supply adopts a modular fan - less design, which not only reduces the failure risk caused by fan failures but also eliminates the noise and dust problems brought by fans. This design is suitable for harsh industrial environments.
• Continuous Monitoring and Protection: It continuously monitors the operating status of the power supply system and has protection functions against over - current, over - voltage, under - voltage, and short - circuit. When a fault occurs, it can quickly cut off the power supply to protect the safety of system components.

Technical Specifications

• Output Voltage and Current: It usually provides a 24 VDC output voltage with output current options of 10 A or 20 A, corresponding to output powers of 240 W and 480 W, respectively. Some models may also offer an auxiliary 48 VDC output for loop and contact wetting purposes.
• Power Quality: The output voltage stability is high, generally within a fluctuation range of ±2%. It can provide a peak current of 1.5 times the nominal current for at least 4 seconds while maintaining the voltage above 20 VDC, and the short - circuit current is 1.5 times the nominal current at near - zero volts. The hold - up time tolerance is greater than 20 ms (full load, 100 VAC input, ambient temperature of +25 °C).
• EMC and Certification: It complies with relevant EMC standards such as EN 61000 - 6 - 2, EN 61000 - 6 - 3, and EN 55011 Class B, and has passed relevant certifications such as CE, which ensures its electromagnetic compatibility and compliance in industrial environments.