• Bently Nevada 177896-01 3701/44 ADAPT Aeroderivative Monitor
  • Bently Nevada 177896-01 3701/44 ADAPT Aeroderivative Monitor

Bently Nevada 177896-01 3701/44 ADAPT Aeroderivative Monitor

plcru@foxmail.com

+86 18185397189

Bently Nevada 177896-01 3701/44 ADAPT Aeroderivative MonitorProduct overviewPart

Bently Nevada 177896-01 3701/44 ADAPT Aeroderivative Monitor

Bently Nevada 177896-01 3701/44 ADAPT Aeroderivative Monitor

Product overview Part number 177896-01 is the processor module for the 3701/44 ADAPT Aeroderivative Monitor, a distributed machinery protection and condition monitoring unit built for aeroderivative gas turbines and driven equipment including gearboxes, compressors and pumps. ADAPT stands for Advanced Distributed Architecture Platform Technology. This monitor is optimized for high-speed dynamic signal processing, order tracking, narrow-band filtering and combustion pulsation measurement. It is commonly deployed for LM2500, LM6000, FT4, FT8, RB211 and similar aero-derivative turbine packages, suitable for direct skid mounting near machinery to reduce field wiring. BNMC software is required for configuration, validation and calibration.

Signal input 12 dynamic sensor input channels, 2 Keyphasor / speed input channels. Supported sensor types include eddy current proximity probes, IEPE accelerometers, charge accelerometers, velocity transducers, dynamic pressure sensors and magnetic speed pickups. Synchronized parallel sampling across all channels.

Signal processing 24-bit sigma-delta A/D conversion, sampling rate 102.4 ksps. Dynamic range 110 dB. Frequency bandwidth 0.5 Hz to 40 kHz. Configurable nX order tracking filters, multiple bandpass filters per sensor input, synchronous and asynchronous spectrum calculation up to 3200 lines. Supports shaft radial position, thrust position, casing absolute vibration and combustion dynamic pressure measurements. Typical measurement accuracy ±0.5% full scale.

Communication interfaces Dual independent 10/100 Base-T Ethernet ports, Net A and Net B. Protocols include Modbus TCP and Ethernet Global Data EGD. Buffered analog signal outputs available via 15-pin D-SUB connector. Relay outputs are provided by separate companion relay module 177897-01.

Power supply Dual redundant 24 VDC power input.

Environmental rating Operating ambient temperature -30°C to +65°C. Storage temperature -40°C to +85°C. Relative humidity 0% to 95%, non-condensing.

Mechanical and construction Compact modular design, skid mountable. Origin USA. Hardware configuration lock prevents modification while in run mode. Built-in continuous self-diagnostics for sensor, wiring, power and processor health.

Certifications and compliance Designed to meet API 670 machinery protection requirements. CE marked, RoHS compliant, hazardous area certification for Zone 2 applications.

Key features Dual redundant processor capable for critical protection applications. Autonomous protection logic execution without host software dependency. Configurable alarm delay from 100 ms up to 60 minutes. False trip suppression logic. Native integration with System 1 Evolution condition monitoring platform. Low wiring footprint compared with traditional rack-based TSI systems.

3701-44 177896-01.jpg

3701-44 177896-01..jpg