330101-00-16-10-02-05 | Bently Nevada | Proximity Probe

Bently Nevada's 330101-00-16-10-02-05 is an 8mm eddy current proximity probe of the 3300 XL series. The following is a detailed analysis of this model:

Product Features

Measurement principle: Based on the eddy current effect, it can non-contactly measure the gap change between the probe and the metal surface being measured, and convert it into a corresponding electrical signal, which can accurately measure shaft vibration, axial displacement, speed and other parameters.

Physical properties: The probe tip is usually made of polyphenylene sulfide (PPS) material, which has good high temperature resistance and corrosion resistance; the shell is generally AISI 303 or 304 stainless steel, with a high protection level, and can adapt to the operating temperature range of - 51℃ to + 177℃.

Installation and compatibility: The probe shell is 1.6 inches long, which is easy to install on a variety of equipment, especially suitable for occasions with compact space. This probe needs to be used with a 3300 series preamplifier (such as the 330180 series) to form a complete monitoring system.

Application scenarios

It is mainly used for monitoring the status of rotating machinery in various industrial fields, such as steam turbines, compressors, pumps, fans and other equipment in petrochemical, electric power, metallurgy, aerospace and other industries. It can be used to measure the parameters of the shaft system vibration, eccentricity, shaft displacement and other parameters of these equipment, and can also be used to monitor gear speed, key phase, etc., so as to timely discover potential faults of equipment and ensure the safe and stable operation of equipment.