BENTLY NEVADA 330101-00-08-10-02-05 PROXIMITY SENSOR

BENTLY NEVADA 330101 - 00 - 08 - 10 - 02 - 05 is an 8mm eddy current proximity sensor of the 3300 XL series. Here are the specific instructions:

Model meaning:

A position "00": indicates that the unthreaded length is 0.0 inches.

B position "08": represents the total length of the probe housing is 0.8 inches.

C position "10": indicates that the total length of the probe is 1.0 meters (3.3 feet).

D position "02": indicates that the micro coaxial ClickLoc connector and standard cable are used.

E position "05": means that there are multiple agency certifications.

Product Features:

Multiple options: There are two options of armored and unarmored, as well as multiple connector options, which are convenient for users to configure according to actual needs.

Strong interchangeability: The probes and cables are fully interchangeable, which is convenient for installation, maintenance and replacement of parts, which can reduce maintenance costs and downtime.

Working principle: Based on the eddy current effect, when the sensor is close to the metal surface to be measured, eddy currents will be generated on the metal surface. By detecting the change in the magnetic field generated by the eddy current, the gap change between the probe and the metal surface to be measured is converted into a proportional voltage signal, thereby realizing non-contact displacement measurement.

This sensor is mainly used for state monitoring of rotating machinery, such as measuring radial vibration, axial displacement, speed and other parameters of the shaft. It is widely used in key equipment in the petroleum, chemical, electric power, metallurgy and other industries, providing an important basis for equipment fault diagnosis and maintenance, and ensuring the safe and stable operation of the equipment.