Vibro-meter 2004-040-100-015 VM600 IOCR input/output card

Vibro-meter 2004-040-100-015 is a specific model of VM600 IOCR input and output card. Here is an introduction to it:

Function and role

System control and communication: VM600 IOCR input and output card is used in conjunction with CPUR card as the system controller and data communication gateway of VM600 rack-mounted mechanical protection system (MPS) and/or condition monitoring system (CMS), and undertakes the key tasks of system control and data communication.

Communication interface support: Supports Modbus RTU/TCP communication protocol, which can easily interact with other devices supporting the protocol to achieve remote monitoring and system integration.

Hardware features

Dimensions and weight: The dimensions are approximately 16.3cm×3.8cm×5.8cm, and the weight is approximately 0.35kg. It is small and easy to install in the VM600 series rack.

Installation method: IOCR card is a single-width card that occupies one slot of VM600 rack. It is used in pairs with the CPUR card. The CPUR is installed at the front of the rack, and the IOCR is installed at the rear of the rack, in the slot directly behind the CPUR, and is directly connected to the rack backplane through two connectors.

Output relay: Equipped with 5 output relays, it can be used for the status and alarm indication of the signal system. The on and off of the relays are controlled by software to achieve the control of external devices or the output of alarm signals.

Application scenario

Mainly used in mechanical protection and status monitoring systems in the industrial field, such as in the monitoring and protection of rotating mechanical equipment such as large motors, fans, pumps, etc., by cooperating with other modules in the VM600 system, the vibration, temperature, speed and other parameters of the equipment are collected in real time, and the relevant data is transmitted to the monitoring system after processing, and alarm and protection actions are performed according to the preset thresholds to ensure the safe and stable operation of the equipment.