Reliance Electric Drive Keypad Operator Interface 802273-14R

The Reliance Electric Drive Keypad Operator Interface 802273 - 14R is an operator interface module produced by Reliance Electric for the FlexPak 3000 series of drives. Here is a brief introduction:

Appearance: It is a small square device with a long rectangular liquid crystal display (LCD) on top. There is a white label on the right side of the display with black text detailing the different information and functions that the LCD display will display to the operator, from top to bottom, "Fault", "Alarm", "Interlock Normal", "Drive Ready", "Run", "Current Limit" and "Torque Limit". Below the LCD display and its label is a keyboard with rich functions, a total of 15 buttons, used to input information to the LCD display and control the functions of the drive connected to the interface module.

Function: As an operator interface unit, it provides the user with an interface to interact with the FlexPak 3000 series of drives. Through keyboard operation, the user can enter instructions and set parameters, such as starting or stopping the drive, adjusting the operating speed, setting the torque limit, etc. At the same time, the LCD display will display the drive's operating status, fault information, alarm information, etc. in real time, helping users to understand the drive's working status in a timely manner so as to perform corresponding operations and maintenance. For example, the user can press the "jog" button to start the jog function of the drive connected to it, and can also use the four direction buttons to control the content of the LCD display.

Installation method: Usually installed in front of the FlexPak 3000 drive. Most drives are already equipped with an 802273-14R operator interface module on their panel, but this unit can also be used as a replacement unit.