B&R 80VD100PD.C000-01 ACOPOSmicro Inverter Module

B&R 80VD100PD.C000 - 01 ACOPOSmicro inverter module is a high-performance drive module for industrial automation launched by B&R. The following is a detailed introduction:

Electrical parameters

Power input: The input voltage is 24 - 64VDC ± 25%, with undervoltage protection (cut-off voltage <18VDC) and overvoltage protection (cut-off voltage > 95VDC) functions, and supports voltage monitoring.

Motor connection: There are 2 motor connection ports, the rated current is 8Arms/11.3A peak at 20kHz and below, 6.5Arms/9.2A peak at 40kHz and temperature above 45°C, the maximum current of each motor is 10.6Arms/15A peak, the maximum peak current of the module is 30A, the rated switching frequency is 5kHz, the selectable switching frequency is 5/10/20/40kHz, and the maximum motor line length is 25m.

Other interfaces: equipped with 2 EnDat 2.2 encoder input interfaces, the encoder power supply output voltage is typically 12.5VDC, and the maximum load capacity is 250mA; 1 enable input interface, nominal voltage is 24VDC; 2 digital input/trigger input interfaces, which can be used as trigger inputs, the input voltage is nominal 24VDC, and the maximum is 30VDC; 1 digital output interface, 24VDC, 1A.

Features

High-precision control: It can achieve high-precision control of the servo motor, obtain the position and speed information of the motor through the EnDat 2.2 encoder interface, realize accurate position positioning and speed control, and meet various high-precision motion control requirements.

Multiple protection functions: It has multiple protection functions such as overload, short circuit, open circuit and undervoltage, which can effectively protect the module and motor from damage under abnormal conditions and improve the reliability and stability of the system.

Compact design: The module size is 65mm wide, 134mm high, 95mm deep, and weighs 750g. The compact structure makes it easy to install in control cabinets or equipment with limited space.

Easy to integrate: With a POWERLINK interface, it can easily connect and communicate with B&R's automation control system and other devices that support the POWERLINK protocol, achieving fast data transmission and real-time control, and easy to integrate into complex industrial automation systems.

Working conditions

Temperature range: The operating temperature is 0-45°C, the storage temperature is -25-55°C, and the transportation temperature is -25-55°C.

Humidity range: The relative humidity is 5-85% during operation, without condensation; the relative humidity is 5-95% during storage and transportation, without condensation.

Installation requirements: It must be installed on a conductive and grounded backplane, and can be installed on a mounting plate or cold plate for heat dissipation by screws. The installation direction is vertical installation, the pollution level is level 2 (non-conductive pollution), and the protection level is IP20.