IS420ESWBH3A | GE Industrial ESWB Ethernet Switch

Here is the datasheet for the GE IS420ESWBH3A Industrial Ethernet Switch:

General Information

Product Model: IS420ESWBH3A.

Product Type: Unmanaged Industrial Ethernet Switch.

Series: GE Speedtronic Mark VIe.

Manufacturer: General Electric (GE).

Hardware Specifications

Ports: 16 10/100Base-TX copper ports, RJ-45 interface.

Connectors: Supports multiple insertion and removal of RJ-45 connectors, with an expected service life of 200 insertion/removal cycles.

Power Supply: Operating voltage 24/28 VDC, with redundant power input to ensure that the switch can still operate normally when one power supply fails.

Buffer: Minimum 256kb buffer, with 4k Media Access Control (MAC) addresses.

Dimensions: Height 18.8 cm × Width 8.6 cm × Depth 5.6 cm.

Weight: about 0.5kg.

Network function

Protocol compatibility: supports 802.3, 802.3U, 802.x and other standard protocols.

Speed and duplex mode: 10/100Base-T copper cable interface, supports automatic negotiation speed and full/half duplex mode.

Uplink: provides 100Mbps FX uplink port.

Auto-sensing: with HP-MDIX auto-sensing function, it can automatically identify and adapt to straight-through or crossover network cables.

Indicator light

Link status indication: Each port is equipped with an LED indicator light, which indicates the link existence, activity, duplex and speed status through different colors. Steady yellow indicates that the 10MB link is in use, steady green indicates that the 100MB link is in use, and no indicator light indicates no link.

Power indication: There is a power indicator LED to display the power status.

Environmental specifications

Operating temperature: -40°C to 75°C.

Humidity range: 0% to 95%, non-condensing.

Installation method

Adopt DIN rail or potential panel mounting, meet vibration and shock requirements, can be installed on the control system panel, convenient for maintenance and operation.