IC660BBS103 | Ge Fanuc PLC Module/Rack
Delivery time 3 days
Product origin New/used
Email plcru@foxmail.com
Mobile/wechat /WhatsApp +86 18185397189
The following is the more detailed data sheet content of the IC660BBS103 Ge Fanu
The following is the more detailed data sheet content of the IC660BBS103 Ge Fanuc PLC module:
Electrical specification:
Rated voltage: 115VAC or 125VDC.
Input voltage range: 93-132VAC.
Output voltage range: 105-132VDC.
Load current: 2.0 amperes at each output point.
Circuits and Isolation
Points: 8.
Point grouping: 4 groups, 2 points in each group.
Isolation voltage: It can withstand a voltage of 250VAC or VDC between two groups or between one group and ground, with a transient rated value of 2000V every 10 seconds.
Electronic fuse: Each circuit used for output has an electronic fuse function. After a short circuit, the circuit will immediately shut down within 5 microseconds, and then can be restarted through a handheld monitor or CPU.
Machinery and Environment
Installation method: It is recommended to install it in a clean and contamination-free protective enclosure. It can be installed upwards or downwards. A 2-inch space should be left between the modules for ventilation.
Terminal block: All terminals can accept 1 AWG #12 wire or 2 AWG #14 wires. The recommended minimum wire diameter is AWG #22, which can accommodate a maximum of 0.27 inches of ring-shaped terminals.
The recommended torque of the terminal screw is 0.678N/m.
Operating temperature: 0-60℃.
Storage temperature: -40-80℃.
This module is an 8-loop I/O isolation module of GE Fanuc, which can be used for 2-wire or 3-wire switch input and has no fault switch diagnosis function.
Related products