Emerson A6110 Shaft Relative Vibration Monitor

Data sheet information for the Emerson A6110 shaft relative vibration monitor:

General information

Product model: A6110.

Brand: Emerson.

Application scenarios: Designed for the most critical rotating machinery in factories, such as steam, gas, compressors and hydro-turbine machinery.

Features

Measurement mode: Supports multiple measurement modes such as thermal configuration, zero to peak, peak to peak, etc.

Channel characteristics: Dual-channel design, you can choose independent dual-channel or combined dual-channel mode. Each channel can measure axial, radial or tangential vibration.

Alarm function: Optional normally open and normally closed alarms, each channel has a 0-5 second delay, when using the A6740 relay card, the delay time can be extended to 0-36 seconds, and the alarm can be blocked when the channel is uncertain.

Adjustable range: The adjustable range is 5% to 100% of the full scale value, and the resolution is 1% of the full scale value. There is an alarm hysteresis function when the signal value drops.

Output Type: Pre/post buffered and ratiometric outputs with remotely selectable limit multiplication and trip bypass, including 0/4 - 20 mA output, 0 - 10 V output.

Self-Test: Includes monitoring of hardware, power input, hardware temperature, sensors, and cables.

Electrical Characteristics

Input Type: Eddy current, differential.

Input Voltage Range: -1 to -22 VDC.

Sensor Power Supply: Supports 0 - 8000 mV, electrically isolated from all system voltages and system supply voltage, which is open-circuit and short-circuit proof.

Frequency Range: 0.1 to 1000 Hz.

Physical Characteristics

Operating Temperature: 0°C to 65°C (32°F to 149°F).

Storage Temperature: -30°C to 85°C (-22°F to 185°F).

Relative Humidity: 5% to 95%, noncondensing.

Weight: 0.46 kg.