DEIF PPU/2/GS 100066899.70 Generator paralleling and protection unit
plcru@foxmail.com
+86 18185397189
DEIF PPU/2/GS 100066899.70 Generator paralleling and protection unitProduct over
DEIF PPU/2/GS 100066899.70 Generator paralleling and protection unit
Product overview PPU/2/GS belongs to DEIF Multi-line 2 series, an integrated genset synchronising, load sharing and generator protection controller, part number 100066899.70. It is widely used for diesel generator sets in industrial power plants, marine power systems, standby power stations and cogeneration installations. It handles automatic synchronisation, breaker closing control, active and reactive load sharing, genset protection and alarm management. This model is end-of-life, superseded by PPU-3 and PPU 300 series controllers.
Measurement 3-phase true RMS measurement, galvanically isolated voltage and current inputs. Voltage measuring range 100–690 V AC, 50/60 Hz. Current input selectable 1 A or 5 A secondary CT rating.
Control modes Automatic synchronisation with adjustable voltage, frequency and phase angle window. Isochronous fixed frequency mode, droop mode, base load fixed power mode, active and reactive load sharing for parallel gensets. Closed-loop governor and AVR regulation via analogue outputs.
Protection functions (ANSI codes) Reverse power protection 32, two-stage overcurrent 51, overvoltage, undervoltage, overfrequency, underfrequency, vector shift protection, loss of excitation, breaker failure monitoring. Each protection stage has configurable delay, alarm only or trip with breaker opening.
Electrical Auxiliary supply 12 VDC or 24 VDC. Relay outputs rated 250 VAC / 24 VDC, 8 A resistive load. Analogue outputs 0–20 mA for governor and AVR control. RS232 and RS485 serial communication ports, Modbus protocol supported for SCADA and remote monitoring. Optional GSM alarm SMS notification.
I/O and display Local LCD display for measured values, status texts and alarm messages. Remote door-mounted display available as separate option. Configurable digital inputs for feedback, mode selection and external commands. Digital relay outputs for trip, alarm and breaker control. Built-in M-logic programmable logic for custom interlock and sequence control.
Mechanical and mounting DIN rail or screw panel mounting inside switchgear cabinet. Origin Denmark.
Environmental Operating temperature -20 °C to +70 °C. Storage temperature -40 °C to +85 °C. Humidity 5% to 95% non-condensing. Pollution degree 2, installation category III up to 600 V.
Certifications CE marked, compliant with relevant marine and industrial EMC standards.





