5AP920.1043-01 Touch Screen B&R

B&R 5AP920.1043-01 is a compact industrial touch screen, belonging to the B&R Automation Panel 900 series, designed for industrial automation scenarios. The following is an integrated analysis based on product features, technical specifications and application scenarios:

I. Core technical parameters

Display and touch

Size: 10.4-inch TFT color display (some data sources are mistakenly marked as 10.1 inches, the actual standard is based on the B&R official series).

Resolution: XGA (1024×768 pixels), supports 16 million colors, suitable for industrial data visualization.

Touch technology: analog resistive single-point touch, supports operation with gloves, and requires regular calibration (because the resistance layer slightly shifts over time/voltage, the stability is strong after calibration).

Protection: The front panel is IP65 dust and water resistant, suitable for harsh environments such as oil, dust, etc.

Interface and compatibility

USB 2.0 is standard (supports external USB disk, keyboard), optional DVI/SDL interface, connected to Automation PC series (such as APC 510/620/810, etc.), maximum USB transmission distance is 5 meters.

Support RS232 serial port, suitable for traditional industrial equipment.

Physical and environmental

Dimensions: about 270×210mm (10.4-inch standard cabinet installation), ultra-thin design saves space.

Working temperature: 0℃~55℃, storage temperature: -20℃~70℃, suitable for wide temperature requirements of industrial sites.

Input power supply: 24V DC, low power consumption design.

2. Functional features

Industrial-grade reliability

The resistive screen is resistant to mechanical shock and suitable for frequent operation; anti-glare surface treatment, clear display under strong light.

Support vertical installation, adapt to multi-angle layout of control cabinet.

Flexible scalability

As a human-machine interface (HMI), it can be connected to an external display through the SDL interface to expand to dual-screen monitoring; compatible with B&R's full range of automation controllers, and supports remote firmware upgrades (via the ADI control center).

Easy maintenance

Modular design, the touch screen glass can be replaced separately (such as model 5AP920.1043-K01 corresponds to glass digitizer + cover layer), with low maintenance costs.

Built-in diagnostic function, real-time monitoring of screen status, support for screen protection to prevent screen burn-in.