BENTLY NEVADA 3300/35-13-02-02-00-01 6 CHANNEL TEMPERATURE MONITOR

BENTLY NEVADA 3300/35 - 13 - 02 - 02 - 00 - 01 is a 6-channel temperature monitor that is part of the Bently Nevada 3300 Series Monitoring System. Here is a brief introduction:

Features

Multi-channel monitoring: With 6 independent channels, it can monitor the temperature of 6 different locations or components in real time, which helps to fully understand the temperature distribution of the equipment and detect potential overheating problems in time.

High-precision measurement: It uses a high-precision temperature sensor to accurately measure temperature changes. The measurement accuracy can usually reach ±1℃ or higher, depending on the sensor type and configuration.

Configurable alarm function: The user can set the alarm threshold for each channel independently. When the temperature exceeds the set upper limit or falls below the lower limit, the monitor will immediately send an alarm signal to remind the operator to take appropriate measures to prevent damage to the equipment due to overheating or overcooling.

Multiple output modes: Provide multiple output interfaces, such as analog output (such as 4-20mA current output) and digital output (such as RS-485 communication interface), which is convenient for integration with other control systems or data acquisition systems to achieve remote monitoring and data recording.

Fault diagnosis function: With self-diagnosis function, it can automatically detect sensor faults, line faults, etc., and give corresponding fault information through indicator lights or communication interfaces, which is convenient for quick positioning and troubleshooting.

Technical parameters

Input type: Supports multiple types of temperature sensor inputs, such as thermocouples (K type, J type, etc.), thermal resistors (PT100, CU50, etc.).

Measuring range: It varies depending on the type of sensor connected. For example, for PT100 thermal resistors, the measuring range is usually -200℃ to +850℃; for K type thermocouples, the measuring range is generally 0℃ to +1372℃.

Output accuracy: The analog output accuracy is generally ±0.5% of full-scale.

Working temperature: usually 0℃ to +60℃, storage temperature -40℃ to +85℃.

Power supply requirements: generally support 24V DC power supply, power supply ripple requirement is less than 10%.

Application scenarios

This temperature monitor is widely used in various industrial fields, such as rotating mechanical equipment in power, petrochemical, metallurgy, machinery manufacturing and other industries, such as turbines, compressors, motors, etc., to monitor the temperature of key components such as bearings, stators, rotors, etc. to ensure the safe and stable operation of the equipment.