Bently Nevada 3300/16-02-01-01-00-00-00 Dual Vibration Monitor

Bently Nevada 3300/16 - 02 - 01 - 01 - 00 - 00 - 00 is a dual vibration monitor. Here is some information about it:

Features

Dual-channel monitoring: Two independent channels that can continuously measure and monitor radial vibration and average shaft position (gap). Using inputs from two proximity probes/proximity systems, vibration conditions in two different positions or directions can be monitored simultaneously, fully reflecting the vibration status of the equipment.

User-programmable features: The power supply can be user-programmed to - 24 Vdc or - 18 Vdc. The frequency response can be programmed between 4 to 4,000 Hz (240 to 240,000 cpm) or 1 to 600 Hz (60 to 36,000 cpm). The recorder output can be programmed between + 4 and + 20 mA, 0 and - 10 Vdc, or + 1 and + 5 Vdc. Sensitivity can also be user programmed to 100 mV/mil (4 V/mm) or 200 mV/mil (8 V/mm).

Alarm Capabilities: An alarm relay module can be installed behind each monitor to provide alarms based on preset alarm values. Relay options include epoxy sealed, hermetic sealed, quad relay (epoxy sealed only).

Display Capabilities: Liquid Crystal Display with non-multiplexed vertical bar graph (LCD), each channel has its own 63-segment LCD, and probe gap indication on the third center scale.

Specifications

Full Scale Range: "02" in the model number indicates a full scale range of 0 - 5 mils peak-to-peak.

Sensor Inputs: "01" accepts 3300 8 mm, 3300 xl 8mm, or 7200 5 mm and 8 mm proximitor sensors with a sensitivity of 200 mv/mil.

Alarm Relays: "01" indicates epoxy sealed relays.

Agency certification: "00" means no special agency certification requirements.

Safety barrier: "00" means no safety barrier.

Trip multiple: "00" means no trip multiple setting.

Application field

Rotating machinery monitoring: widely used in power, petrochemical, metallurgy and other industries, can be used to monitor the radial vibration and shaft position of rotating machinery such as steam turbines, compressors, pumps, fans, etc., to detect abnormal vibration of equipment in time and prevent equipment failure.

Predictive maintenance: through real-time monitoring of vibration data, provide a basis for predictive maintenance of equipment, help maintenance personnel to formulate maintenance plans in advance, reduce equipment downtime and maintenance costs.

Fault diagnosis: Accurate vibration measurement helps to diagnose the cause of equipment failure, such as imbalance, misalignment, bearing wear, etc., so as to take effective maintenance measures.