Bently Nevada 26530-12-05-00-000-105-24-00-00 Dual Probe Transducer System

Bently Nevada 26530-12-05-00-000-105-24-00-00 is a dual probe sensor system, here is the relevant information:

Product Overview

The system consists of a proximity probe and a seismic or velocity sensor (Velomitor) mounted in the same sensor housing, capable of making four independent measurements, including relative radial position (displacement) of the shaft relative to the probe mounting location, relative radial dynamic motion (vibration) of the shaft relative to the probe mounting location, absolute vibration of the machine housing, and absolute motion of the shaft.

Component Analysis

Proximity Probe: Model 3300 XL 8mm probe, with multiple advantages, such as the patented TipLoc mold technology to ensure a secure connection between the probe tip and the body, and the probe cable uses the patented CableLoc design, which can withstand 330 Newtons (75 pounds) of pull force.

Velocity sensor: Velomitor sensor with a sensitivity of 100 mV/ips (4 mV/mm/s) and a temperature range of -55℃ to +121℃ (-67℉ to +250℉).

Technical specifications

Probe temperature range: The temperature range of the 3300 XL 8mm probe is -51℃ to +177℃ (-60℉ to +351℉). It should be noted that exposing the 3300 XL probe to temperatures below -34℃ (-30℉) may cause premature failure of the probe pressure seal.

Installation parameters: The probe lead length option is 0.5 meters, the probe penetration option is 10.5 inches, and no adapters, accessories, and probe supports/oil seals are required.

Application scenarios

Mainly used for condition monitoring of industrial equipment, especially rotating machinery such as gas turbines, steam turbines, compressors, etc. It can help monitor the operating status of the equipment and promptly detect potential fault hazards, such as abnormal conditions such as shaft vibration and displacement, to ensure the safe and stable operation of the equipment.