Bently Nevada 19000-00-95-12-02 Proximity Sensor Probe

Bently Nevada 19000 - 00 - 95 - 12 - 02 is a proximity sensor probe, which belongs to Bently Nevada's product in the field of equipment status monitoring. The following is its relevant introduction:

Working principle: Based on eddy current technology. When the probe is close to the surface of a conductive object, eddy currents will be generated on the surface of the object. The magnetic field generated by the eddy current will react on the probe, causing the inductance of the probe to change. By detecting this inductance change, the distance between the probe and the surface of the object is measured, thereby realizing the monitoring of parameters such as vibration and displacement of the object.

Features and advantages

High-precision measurement: It can accurately measure parameters such as vibration and displacement of the shaft, provide accurate data support for the status evaluation of the equipment, and the measurement accuracy can reach 0.01 mm.

Non-contact detection: It avoids wear and damage caused by direct contact with the object being measured, and will not interfere with the operation of the object being measured. It is suitable for various harsh industrial environments and can resist the erosion of substances such as dust, water vapor and oil.

Rugged and durable: Made of high-quality materials such as stainless steel housing and high-temperature resistant plastic, it has good corrosion resistance and high temperature resistance, and can operate stably and for a long time in harsh industrial environments.

Multiple application scenarios: Mainly used for vibration and position monitoring of rotating machinery, such as large key equipment such as turbines, compressors, motors, etc., which can help to discover potential equipment failures in advance and provide a basis for preventive maintenance.

Performance parameters: Usually different models of Bently Nevada proximity sensor probes differ in parameters such as measurement range, sensitivity, and linearity. Generally speaking, its measurement range may be between a few millimeters and tens of millimeters, and the sensitivity may reach a few volts per millimeter. For example, the sensitivity of the 3300 XL 8mm proximity sensor system is 7.87 V/mm or 200 mV/mil. However, for the model 19000-00-95-12-02, due to the lack of a detailed product manual, the accurate performance parameters are difficult to determine.

Installation and maintenance: During installation, it must be installed according to the specified installation distance and angle to ensure the accuracy of the measurement. In terms of maintenance, it is necessary to regularly check whether the probe connection is loose or the cable is damaged, etc. The sensor also needs to be calibrated to ensure the stability and accuracy of its performance.