B&R 8EI8X8HWS10.0700-1 Servo Drive

B&R 8EI8X8HWS10.0700 - 1 servo drive is a product in the ACOPOS P3 series. The following is a detailed introduction:

Basic information

Supports dynamic node allocation: With DNA function, it is convenient for flexible configuration and management in the system.

Plug-in module slot: There is 1 slot for inserting plug-in modules to achieve functional expansion.

Certification: Passed certifications such as UL/c - UL - US.

Mechanical characteristics: The dimensions are 66mm wide, 290mm high, 258.5mm deep (wall-mounted) (261mm with 8EXA front cover), and the weight is 3.2kg.

Electrical characteristics

Power input

Network configuration: Supports network configurations such as TN - S, TN - C - S.

Voltage range: The main input voltage is 3×200 - 480V AC±10%, and the frequency is 50/60Hz±4%.

Apparent power: 10kVA max, inrush current 45A max, switching interval 60s typical.

Line filtering: Integrated line filter, EN 61800-3, class C3.

DC bus: DC bus capacitance 470μF.

24V DC supply

Voltage: Input voltage 24V DC ±25%.

Capacitance: Input capacitance 4312μF.

Current: Current consumption 0.9A plus motor brake current.

Motor connection

Quantity: 1 motor connection port.

Power and current: Continuous power 4kW, continuous current 8.8A rms, peak current 24A rms, peak power output 10kW.

Switching frequency: Nominal switching frequency 5kHz, selectable 5/10/20kHz. When the switching frequency is 20kHz, the continuous current decreases at a rate of 0.105A/k starting from 11.2°C; when the installation altitude is above 500m, the continuous current decreases by 0.88A effective value for every 1000m increase.

Motor cable length: depends on the switching frequency, 75m at 5kHz, 37.5m at 10kHz, and 18.75m at 20kHz.

Braking resistor

Peak power: 7kW/25kW internal/external.

Continuous power: 100W/2kW internal/external.

Minimum braking resistor (external): 25Ω.

Features

Enable input: 2 enable inputs, current sinking circuit, electrically isolated from ACOPOS P3 and inputs, nominal input voltage 24V DC, maximum 30V DC, input current about 9mA at nominal voltage.

Encoder interface: 1 digital multi-standard encoder interface, type Endat 2.2, 8-pin female Mini I/O connector, no status indicator, no electrical isolation between encoder and ACOPOS P3, maximum encoder cable length 100m.

Trigger inputs: 2 trigger inputs, current sink type circuit, electrically isolated from ACOPOS P3 and inputs, nominal input voltage 24V DC, maximum 30V DC, input current about 4mA at nominal voltage.

Temperature sensor connection: 1 temperature sensor connection, resistance range 500Ω to 5kΩ.

Operating conditions

Installation altitude: Nominal 0 to 500m, maximum 4000m.

Pollution degree: Degree 2 (non-conductive pollution) in accordance with EN 61800-5-1.

Overvoltage category: Category III in accordance with EN 61800-5-1.

Protection class: IP20 in accordance with EN 60529.

Ambient temperature: Operating nominal 5 to 40°C, maximum 55°C; Storage - 25 to 55°C; Transport - 25 to 70°C.

Relative humidity: Operating 5 to 85%, non-condensing; Storage 5 to 95%; Transport 95% at 40°C.