B&R Automation 8EI8X8HWT10.0600-1 Servo Drive

B&R 8EI8X8HWT10.0600 - 1 servo drive is a product in the ACOPOS P3 series. The following is a detailed introduction:

Basic information 2

Support dynamic node allocation: It has DNA function, which is convenient for flexible configuration and management in the system.

Plug-in module slot: There is 1 slot for plug-in modules to achieve functional expansion.

Certification: It has passed certifications such as UL.

Mechanical characteristics: The dimensions are 66mm wide, 374mm high, 258.5mm deep (wall-mounted) (261mm with 8EXA front cover), and the weight is 4kg.

Electrical characteristics

Power input

Network configuration: Supports multiple network configurations.

Voltage range: The main input voltage is 3×200 - 480V AC±10%, and the frequency is 50/60Hz±4%.

Apparent power: There are corresponding specifications for maximum apparent power and surge current.

DC bus: has a certain capacitance value to ensure stable DC power supply.

24V DC power supply

Voltage: input voltage 24V DC±25%.

Capacitance: input capacitance has a specific value.

Current: current consumption is a certain value plus the motor brake current.

Motor connection

Quantity: 3 motor connection ports.

Power and current: the continuous power, continuous current, peak current and peak power output of each motor connection port have clear indicators, such as continuous current is 8.8A effective value, peak current is 24A effective value, etc.

Switching frequency: the nominal switching frequency is 5kHz, and 2.5kHz, 5kHz, 10kHz, and 20kHz can be selected. When the switching frequency changes or the installation altitude increases, the continuous current will decrease accordingly.

Motor line length: depends on the switching frequency, 75m at 5kHz, 37.5m at 10kHz, and 18.75m at 20kHz.

Braking resistor: built-in braking resistor, with peak power and continuous power and other parameter limits.

Features

Fieldbus: Powerlink v2 controlled node (CN), 2 RJ45 interfaces, transmission rate 100Mbit/s.

Enable input: 2 enable inputs, current sinking circuit, electrically isolated from ACOPOS P3 and input, nominal input voltage 24V DC, maximum 30V DC, input current about 9mA at nominal voltage.

Encoder interface: 1 digital multi-standard encoder interface, type Endat 2.2, 8-pin female Mini I/O connector, no status indicator, no electrical isolation between encoder and ACOPOS P3, maximum encoder cable length 100m.

Trigger input: 2 trigger inputs, current sinking circuit, electrically isolated from ACOPOS P3 and input, nominal input voltage 24V DC, maximum 30V DC, input current about 4mA at nominal voltage.

Temperature sensor connection: 1 temperature sensor connection, resistance range 500Ω to 5kΩ.

Operating conditions

Installation altitude: Nominal 0 to 500m, maximum 4000m.

Pollution degree: Degree 2 (non-conductive pollution) in accordance with EN 61800-5-1.

Overvoltage category: Category III in accordance with EN 61800-5-1.

Protection degree: IP20 in accordance with EN 60529.

Ambient temperature: Operating temperature nominal 5 to 40°C, maximum 55°C; Storage temperature - 25 to 55°C; Transport temperature - 25 to 70°C.

Relative humidity: Operating 5 to 85%, non-condensing; Storage 5 to 95%; Transport 95% at 40°C.