B&R 8LSA25.R0060D000-0 Servo Motor

B&R 8LSA25.R0060D000-0 servo motor is a synchronous motor with excellent performance. Here is its detailed introduction3:

Basic parameters: 4 pole pairs, rated speed 6000rpm, stall torque 0.600Nm.

Structural design: smooth shaft, angle joint (rotation), centering diameter 40mm, j6 fit, structure type is self-cooling A, protection level is IP64, no oil seal, suitable for 560VDC working voltage, feedback element is 2-pin R0 rotary transformer.

Performance characteristics: It belongs to the 8LS series synchronous motor, which is specially developed for high-performance applications. This series of motors adopts a slender design and has impressive dynamic characteristics. The fast-axis optimized torque fluctuation brings good controllability. The bearings used in the motor are fully selected and filled with high-quality synthetic lubricants. For special high-demand scenarios such as belt drives, reinforced bearings can also be provided to withstand high radial forces. In addition, the motor is equipped with two independent temperature monitoring systems, one linear temperature sensor located in the motor winding, and the other is a temperature model integrated in the inverter. The combination of the two ensures comprehensive protection of the motor winding.

Encoder characteristics: Usually equipped with a 19-bit encoder as standard, it can ensure the consistency of movement and the accuracy of positioning. A 25-bit encoder can also be selected to meet higher requirements. Both types are available in single-turn and multi-turn versions. The encoder is an absolute value type, does not require batteries, and is maintenance-free. All relevant mechanical and electrical data and information are stored in the encoder. When the encoder and servo drive are connected and powered on, the motor will be automatically identified without any settings on the servo drive.