B&R 0GH-AT610 Analog Input
Delivery time 3 days
Product origin New/used
Email plcru@foxmail.com
Mobile/wechat /WhatsApp +86 18185397189
The following is the data table information of the B&R 0GH-AT610 analog input mo
The following is the data table information of the B&R 0GH-AT610 analog input module:
Channel configuration:
There are a total of 4 channels in Group 1, and the channel identification is AI0+... AI3+
Terminal 3.4 (AI -) is used for voltage and RTD measurements, while terminals 1.9, 2.9, 3.9 and 4.9 are used for current measurements.
Input type:
Supports multiple input types, including 0V -10V voltage, -10V - +10V voltage, 0mA - 20mA current, 4mA - 20mA current, and PT100/PT1000/NI1000 thermal resistors. Each input channel can be configured separately.
Channel input resistance:
The voltage input is greater than 100kΩ.
The current input is approximately 330Ω.
Input filter time constant:
Both the voltage and current inputs are 100μs.
Input signal indication:
Each channel has one LED, and its brightness depends on the value of the analog signal.
Conversion time:
For 4 inputs + 2 outputs, the conversion time is 1ms. For RTD (PT/NI) measurement, the conversion time is 1 second.
Measurement range and accuracy:
0V - 10V range: 12-bit accuracy.
-10V to +10V range: 12-bit accuracy (including sign bits).
0mA - 20mA range: 12-bit accuracy.
4mA - 20mA range: 12-bit accuracy.
RTD (PT100, PT1000, NI1000) range: accuracy ±0.1°C.
Conversion error:
The conversion error of analog values caused by nonlinearity, factory adjustment error and resolution within the normal range.
Related products